Interactions, Behavior, And Stability of Fluorenone inside Zeolite Nanochannels

The development of functional materials based on the supramolecular organization of photoactive species in nanosized porous matrices requires a deep knowledge of host 12guest interactions and of their influence on material properties and stability. Extensive first-principles investigations on the fluorescent dye fluorenone inside zeolite L, both at dry conditions and in the presence of water, have unraveled the molecular origin of the peculiar stability of this composite in humid environments, a fundamental prerequisite for practical applications. Results of first-principles molecular dynamics simulations, structural optimizations, and TDDFT calculations, validated by comparison with experimental data, provide a comprehensive picture of the structure, energetics, electronic excitation properties, and room-temperature behavior of the fluorenone/zeolite L composite and predict a substantial optical anisotropy for this material also maintained upon contact with water. The interaction of the fluorenone carbonyl group with the zeolite extraframework potassium cations is responsible for the dye stabilization in zeolite L nanochannels and features itself as a general leitmotiv regarding important properties of carbonyl functionalized photoactive species in hydrophilic matrices

The effect of pressure on open-framework silicates: elastic behaviour and crystal-fluid interaction

The elastic behaviour and the structural evolution of microporous materials compressed hydrostatically in a pressure-transmitting fluid are drastically affected by the potential crystal-fluid interaction, with a penetration of new molecules through the zeolitic cavities in response to applied pressure. In this manuscript, the principal mechanisms that govern the P-behaviour of zeolites with and without crystal-fluid interaction are described, on the basis of previous experimental findings and computational modelling studies. When no crystal-fluid interaction occurs, the effects of pressure are mainly accommodated by tilting of (quasi-rigid) tetrahedra around O atoms that behave as hinges. Tilting of tetrahedra is the dominant mechanism at low-mid P-regime, whereas distortion and compression of tetrahedra represent the mechanisms which usually dominate the mid-high P regime. One of the most common deformation mechanisms in zeolitic framework is the increase of channels ellipticity. The deformation mechanisms are dictated by the topological configuration of the tetrahedral framework; however, the compressibility of the cavities is controlled by the nature and bonding configuration of the ionic and molecular content, resulting in different unit-cell volume compressibility in isotypic structures. The experimental results pertaining to compression in "penetrating" fluids, and thus with crystal-fluid interaction, showed that not all the zeolites experience a P-induced intrusion of new monoatomic species or molecules from the P-transmitting fluids. For example, zeolites with well-stuffed channels at room conditions (e.g. natural zeolites) tend to hinder the penetration of new species through the zeolitic cavities. Several variables govern the sorption phenomena at high pressure, among those: the "free diameters" of the framework cavities, the chemical nature and the configuration of the extra-framework population, the partial pressure of the penetrating molecule in the fluid (if mixed with other non-penetrating molecules), the rate of P-increase, the surface/volume ratio of the crystallites under investigations and the temperature at which the experiment is conducted. An overview of the intrusion phenomena of monoatomic species (e.g. He, Ar, Kr), small (e.g. H2O, CO2) and complex molecules, along with the P-induced polymerization phenomena (e.g. C2H2, C2H4, C2H6O, C2H6O2, BNH6, electrolytic MgCl2*21H2O solution) is provided, with a discussion of potential technological and geological implications of these experimental findings

TS-1 from First Principles

First principles Studies on periodic TS-1 models at Ti content corresponding to 1.35% and 2.7% in weight of TiO2 are presented. The problem of Ti preferential siting is addressed by using realistic models corresponding to the TS-1 unit cell [TiSi95O192] and adopting for the first time a periodic DFT approach, thus providing an energy scale for Ti in the different crystallographic sites in nondefective TS-1. The structure with Ti in site T3 is the most stable, followed by T4 (+0.3 kcal/mol); the less stable structure, corresponding to Ti in T1, is 5.6 kcal/mol higher in energy. The work has been extended to investigate models with two Ti's per unit cell [Ti2Si94O192] (2.7%). The possible existence of Ti-O-Ti bridges, formed by two corner-sharing TiO4 tetrahedra, is discussed. By using Cluster models cut from the optimized periodic DFT structures, both vibrational (DFT) and electronic excitation spectra (TDDFT) have been calculated and favorably compared with the experimental data available on TS-1. Interesting features emerged from excitation spectra: (i) Isolated tetrahedral Ti sites show a Beer-Lambert behavior, with absorption intensity proportional to concentration. Such a behavior is gradually lost when two Ti's occupy sites close to each other. (ii) The UV-vis absorption in the 200-250 nm region can be associated with transitions from Occupied states delocalized on the framework oxygens to empty d states localized on Ti. Such extended-states-to-local-states transitions may help the interpretation of the photovoltaic activity recently detected in Ti zeolites

Water in acid boralites: Hydration effects on framework B sites

Properties and behavior of protonated boron-containing zeolites at different hydration degree have been investigated by means of periodic DFT approaches. Geometry optimization and room-temperature Car-Parrinello molecular dynamics results, in line with experimental findings, indicate that the BO3-bound silanolic acid site typical of dry boralites should convert to a solvated H3O+ hydrogen bonded to tetrahedral BO4 at moderate water content. By increasing the water loading, the tetrahedral structure of the B site is stabilized and the physicochemical properties of the water molecules solvating the acid proton gradually approach the liquid-phase ones. A relevant role of structural and vibrational properties of the zeolite framework in the water-induced trigonal-to-tetrahedral transition at the B site is highlighted by simulation results

"Hot" Surface Activation of Molecular Complexes: Insight from Modeling Studies

Rock-and-roll over hot floors: Theoretical modeling of the first activation stages of a Cu complex on top of a heated surface (750 K) revealed two mobility regimes, a slow bump-and-rock diffusion over the surface and a fast roll-and-go motion accompanied by significant temperature-induced bond oscillations. This study enables a deeper insight into "hot" surface molecular activation processes.Tanz auf dem Vulkan: Das Modellieren der ersten Aktivierungsstufen eines Cu-Komplexes auf einer beheizten Oberfl\ue4che (750\u2005K) enth\ufcllte zwei Bewegungsarten: eine langsame Diffusion durch \u201eAnsto fen und Taumeln\u201c und eine schnelle Rollbewegung, die mit deutlichen temperaturinduzierten Bindungsoszillationen einhergeht. Diese Befunde geben einen Einblick in die Prozesse bei der Aktivierung durch \u201ehei fe\u201c Oberfl\ue4chen

Energy Transfer from Magnetic Iron Oxide Nanoparticles: Implications for Magnetic Hyperthermia

Magnetic iron oxide nanoparticles (IONPs) have gained momentum in the field of biomedical applications. They can be remotely heated via alternating magnetic fields, and such heat can be transferred from the IONPs to the local environment. However, the microscopic mechanism of heat transfer is still debated. By X-ray total scattering experiments and first-principles simulations, we show how such heat transfer can occur. After establishing structural and microstructural properties of the maghemite phase of the IONPs, we built a maghemite model functionalized with aminoalkoxysilane, a molecule used to anchor (bio)molecules to oxide surfaces. By a linear response theory approach, we reveal that a resonance mechanism is responsible for the heat transfer from the IONPs to the surroundings. Heat transfer occurs not only via covalent linkages with the IONP but also through the solvent hydrogen-bond network. This result may pave the way to exploit the directional control of the heat flow from the IONPs to the anchored molecules─i.e., antibiotics, therapeutics, and enzymes─for their activation or release in a broader range of medical and industrial applications

Qualitative analysis of determinants of measles, mumps, rubella vaccine uptake in European parents

Background Parental concerns about measles, mumps and rubella (MMR) vaccination negatively influence decision to vaccinate their children, this leading to the recently reported vaccine coverage drop in Europe. The ESCULAPIO project, funded by the Italian National Centre for Disease Prevention and Control of the Ministry of Health (CCM), is investigating the main factors underlying decisions on vaccinations, in order to implement targeted campaigns and plan effective strategies. Methods A systematic literature review was carried out on studies describing the determinants underlying MMR vaccination uptake in European parents. Results A total of 45 studies were included in the analysis. The most common factors related with MMR vaccine uptake were knowledge, beliefs, perceptions on vaccines and diseases, reported in 44,4% of the articles. Parents showed doubts on vaccine efficacy, safety, side effects, while in other studies positive beliefs and perceptions were reported. Attitudes/ behaviours were often determinants of the uptake as well as demographic factors (40%). While higher no. of children in the household, lower income, temporary or lacking employment, and non-regular marital status were generally a barrier for vaccination, education level and house tenure were contradictory. Information source/advice and influence or trust of other people, institutions, media were often reported (31,1% and 17,8% respectively), but a clear direction was not showed. Conclusions These preliminary findings showed that communication strategies should provide parents with clear messages on vaccines and preventable infectious diseases, in order to build right knowledge and create correct beliefs and behaviours. Communication should be addressed mainly to more disadvantaged, larger and non-regular families. A quantitative analysis is been currently carrying out and will provide more information on the direction of the effect of the different factor

Overview of methods used to evaluate the adequacy of nutrient intakes for individuals and populations

The objective of the present paper is to review the methods of measuring micronutrient intake adequacy for individuals and for populations in order to ascertain best practice. A systematic review was conducted to locate studies on the methodological aspects of measuring nutrient adequacy. The results showed that for individuals, qualitative methods (to find probability of adequacy) and quantitative methods (to find confidence of adequacy) have been proposed for micronutrients where there is enough data to set an average nutrient requirement (ANR). If micronutrients do not have ANR, an adequate intake (AI) is often defined and can be used to assess adequacy, provided the distribution of daily intake over a number of days is known. The probability of an individual's intake being excessive can also be compared with the upper level of safe intake and the confidence of this estimate determined in a similar way. At the population level, adequacy can be judged from the ANR using the probability approach or its short cut – the estimated average requirement cut-point method. If the micronutrient does not have an ANR, adequacy cannot be determined from the average intake and must be expressed differently. The upper level of safe intake can be used for populations in a similar way to that of individuals. All of the methodological studies reviewed were from the American continent and all used the methodology described in the Institute of Medicine publications. The present methodology should now be adapted for use in Europe

Toward molecular wires confined in zeolite channels for an effective transport of electronic excitation energy.

Sunlight is the fundamental energy source sustaining life on Earth. Green plants are provided of very sophisticated and highly efficient tools to exploit light, they are able to harvest sunlight and to transport electronic excitation energy by means of a particular “antenna system” to reaction centres (natural photosynthesis). The antenna consists of regular arrangements of chlorophyll molecules held at fixed positions by means of proteins. Light absorbed by any of these molecules is transported - by radiationless energy transfer (FRET) - to reaction centres, providing the energy necessary for the chemical processes to be initiated. A green leaf consists of millions of such well-organized antenna devices. A long-standing challenge has been the development of an artificial system able to mimic the photosynthetic system. Artificial antenna systems can be realized once several organized chromophores are able to absorb the incident light and to channel the excitation energy to a common acceptor component1-3. Artificial antenna can be built by incorporating dyes into the one-dimensional channels of zeolite L (ZL). ZL crystals feature strictly parallel nano sized channels arranged in hexagonal symmetry. These channels can be filled with high concentration of suitable guests. The geometric constraints imposed by the host structure allow achieving supramolecular organization of photoactive guests1. It has been shown2,that the properties of the dye-ZL systems depend on the molecular packing inside the channels, controlling the intermolecular and the dyes/framework interactions In this work we presents a study on the optical properties of a two –dyes antenna system in which fluorenone molecules (donor molecule) and thionine(acceptor molecule) are organized in Zeolite L porosities. To interpret the optical properties of the hybrids a detailed structural study at atomistic level was mandatory. Due to the impossibility of studying from the structural point of view a two –dyes systems, two “one-dye” hybrids (ZL/fluorenone and ZL/thionine) were firstly synthesized and characterized to investigate the intermolecular and the dyes/framework interactions4. The results of thermogravimetric, IR, and X-ray structural refinements carried out for the one-dye system ZL/FL established that 1.5 molecules per unit cell is the maximum FL loading , in contrast with the data reported previously in literature5 and that the FL carbonyl group strong interact with a K+ of the ZL. The FL distribution at maximum loading can be consider as a self-assembly of planar dye molecules into a noncovalent nanoladder. FL molecules organized in such a single, continuous nanostructure of dye molecules did not exhibit significant electronic interactions. Indeed, both absorption (recorded in the diffuse reflectance mode) and photoemission electronic spectra of ZL/FL systems with different FL loading scaled almost linearly in intensity with the amount dye hosted in the unit cell (ranging from 0.5 to 1.5), without significant changes of the spectral profiles. Noticeably, the combination and steady state and time resolved photoluminescence data indicated that even at the maximum loading ca. 90% of FL molecules are photoluminescent, with significant increase in the average quantum yield with respect to FL molecules in solution. Such a finding clearly indicates that excited states coupling (Davydov splitting) is not contributing to the optical properties of the material. The structural study of the ZL/TH system revealed that the maximum possible loading of TH is equal to 0.3 molecules per unit cell in agreement with the TGA and literature data6. Short distances between the carbon, sulfur and nitrogen atoms and two water molecule sites , in turn at bond distance from the oxygen atoms of the main channel, suggested a water-mediated Th-ZL interactions7. Moreover, IR spectroscopy provided evidence of the interaction of the aromatic rings with the environment. This likely resulted in an increase of the rate of non-radiative decay of Th molecules in the electronic excited state, because only ca. 5% of Th molecules hosted in the ZL channel appeared photoluminescent. The occurrence of energy transfer from excited FL molecules forming the noncovalent nanoladder in the ZL channels and Th, in the ground state, deposited on the external surface of ZL particles are currently under investigation. In conclusion, we have here presented a study on the physico-chemical properties of dense molecular wires encapsulated in the one-dimensional pores arrays of Zeolite L. Concerning the optical properties of our composites, no evidence of Davydov splitting emerged from our study, indicating that one of the main competitors of the FRET mechanism is not operative notwithstanding the close packed arrangement of FL. We believe that this feature is of overwhelming relevance in view of application of such a system in artificial antenna systems